/01
Plan
Pathway + conduit design
Cable routes, conduit sizing, pull boxes, and risers planned with electrical, IT, and construction trades.
Infrastructure & Integration
Low-voltage infrastructure that gives security systems a reliable foundation.
Pathways, cabling, terminations, and documentation that make security and IT systems last.
Network
Video
Doors
Service
Intro
What this service is, and what it isn't.
Most security system failures trace back to the cabling and pathways underneath them. Access Tech installs structured cabling, security cabling, and head-end infrastructure with the labeling, testing, and documentation that lets the next technician — including ours — actually find and fix things.
/SYSHow the system works
From conduit plan to certified, labeled, documented infrastructure.
The wire and the way it's run determine whether the system above it works for ten years or fails in two. We treat cabling as infrastructure, not as install-day glue.
/02
Rough-in
Pathways installed
Conduit, J-hooks, cable tray, and innerduct installed during construction or coordinated retrofit windows.
/03
Pull
Cable pulled to spec
Cat6/6A, fiber, and specialty cabling pulled with tension control, kept under bend-radius, and protected from EMI.
/04
Terminate
TR / IDF / endpoints
Patch panels, faceplates, and connectors terminated to manufacturer spec. Every cable labeled at both ends.
/05
Test
Certified and documented
Each run tested with a certifier — wire map, length, NEXT, return loss. Results captured to a test report.
/06
Hand off
As-built + warranty
Pathway maps, labeling scheme, test reports, and manufacturer system warranties handed over and stored.
- 01Plan
Pathway + conduit design
Cable routes, conduit sizing, pull boxes, and risers planned with electrical, IT, and construction trades.
- 02Rough-in
Pathways installed
Conduit, J-hooks, cable tray, and innerduct installed during construction or coordinated retrofit windows.
- 03Pull
Cable pulled to spec
Cat6/6A, fiber, and specialty cabling pulled with tension control, kept under bend-radius, and protected from EMI.
- 04Terminate
TR / IDF / endpoints
Patch panels, faceplates, and connectors terminated to manufacturer spec. Every cable labeled at both ends.
- 05Test
Certified and documented
Each run tested with a certifier — wire map, length, NEXT, return loss. Results captured to a test report.
- 06Hand off
As-built + warranty
Pathway maps, labeling scheme, test reports, and manufacturer system warranties handed over and stored.
Cable certification reports are kept with project documentation and inform future moves/adds/changes for years after the install crew leaves.
Pathway topology
Head-end to edge — labeled, terminated, certified.
Structured cabling is the foundation the rest of the security stack rides on. Pulled and terminated correctly the first time.
What it solves
The problems this service addresses.
- Undocumented cabling no one wants to touch
- Poor network readiness for cameras, readers, and intercoms
- Unreliable connectivity that fails intermittently
- Messy head-end equipment that's hard to service
- No pathway planning, leading to retrofits across walls and ceilings
- Cabling that physically blocks the next system from being installed
Capabilities
What we design and install.
Pathway design
Conduit, tray, and pathway planning coordinated with construction and other low-voltage trades.
Structured cabling
Data and security cabling, terminations, and patch fields built for serviceability — not just install-day.
Head-end & rack design
IDF and head-end equipment laid out for airflow, labeling, and the next person who has to touch it.
Testing & documentation
Cable testing, labeling standards, and as-built drawings handed over at project close.
Components
What's typically in the system.
Hardware & components
- Low-voltage and security cabling
- Camera, door, and intercom cabling
- Data cabling coordination with IT
- Conduit and pathway
- Equipment racks and enclosures
- Patch panels and patch fields
- Cable management and labeling
- Power supplies and PDUs
- PoE switch coordination
- Cable testing and certification
- As-built documentation
Integrates with
- Camera, access control, and intercom systems
- IT and network infrastructure
- Audio, paging, and notification systems
- Construction and electrical coordination
Use cases
Where this service shows up.
- New construction and tenant improvements
- School modernization and bond projects
- Camera and access control upgrades
- Multi-building campuses
- Public agency and municipal facilities
- Retrofit projects with limited pathway access
Planning
What to think about before the work starts.
Planning considerations
- Pathway capacity and future growth
- IDF and head-end location
- Power and cooling at the rack
- Labeling and naming standards
- Coordination with electrical, HVAC, and other trades
- Testing requirements and acceptance criteria
- Documentation deliverables at project close
FAQ
Common questions.
Cameras, readers, intercoms, and alarms only work if the cabling underneath them works. Bad cabling causes intermittent failures that are extremely hard to diagnose — and that the system owner usually blames on the device, not the wire.
Sometimes. We test existing cabling against the requirements of the new system. Reusable cabling saves cost; cabling that's near or past its limits is replaced rather than risked.
Low-voltage refers to wiring under 50 volts — the category covering most security, networking, audio-visual, and intercom systems. It runs under different code and trade rules than line-voltage electrical work.
Cabling is a foundation, and it's almost always more efficient to plan and install pathways and cable before the devices that ride on them — especially in new construction. In retrofits we work around what's already there.
At minimum: labeled cable runs, rack and IDF elevations, patch field documentation, test results, and as-built drawings. Without these, every future service call starts with a discovery phase.
Related work
Related services
Access & Entry
Access Control Systems
Card, keypad, mobile, and other credential options where appropriate — designed and installed around the doors, users, and policies of your facility.
Explore/REA
Detection & Monitoring
Video Surveillance & CCTV
IP cameras, NVR and cloud video, coverage planning, and integration with access events — designed for the views that matter.
Explore/CAM
Access & Entry
Intercom & Visitor Entry Systems
Audio and video intercoms, directory systems, and remote release — for lobbies, gates, and staff entrances.
Explore/INT
Infrastructure & Integration
Security System Integration
Access, video, alarms, intercoms, gates, and lockdown — connected so events, evidence, and responses move together.
Explore/INT
Infrastructure & Integration
Service, Maintenance & Repair
Troubleshooting, repair, preventive maintenance, and upgrade planning for the systems you already have.
Explore/WRE
Next step
Talk through your low-voltage & cabling project.
Bring us a building, a door, a camera, or a service problem. We'll help map the next step.